1325 ATC Wood CNC Router Machine

ATC CNC router is a type of smart CNC machine with automatic tool changer spindle kit. ATC is refer to Automatic Tool Changer, the ATC spindle usually carries a tool magazine of 6 cutters or 8 cutters or 10 cutters or 12 cutters. The CNC router tools can automatically change according to the working requirements when the CNC router works, no need of manual operation, with good starting performance and large torque, it can give full play to the advantages of the machine’s high speed and higher efficiency. It adopts high-torque servo motor made in Japan, which has the advantages of low noise, high speed and high positioning accuracy.

Equipped with a unique tool-changing mechanism, you can exchange the required tools at will, and the dedicated tool setting table can accurately compensate the tool length error. The tool change time only takes a few seconds, which will improve the working efficiency greatly. There are two most common types ATC CNC machines, which includes linear type automatic tool changers and rotary type automatic tool changers. The best ATC CNC router machine adopts a rotary 4th axis for 3D cutting and carving.

1. Standard plywood case, its compressive strength and bearing quality is better.

2. The board area is bit, the soil structure is good, it is better in leakproofness and waterproof.

3. When importing, the plywood case is with fumigation-free, the procedure is simple.

The spindle motor power and speed options for 1325 ATC CNC router machines can vary depending on the specific machine model, manufacturer, and intended application. Here are some common power and speed options you may come across:

1. Spindle Motor Power: The power of the spindle motor is typically measured in kilowatts (kW) and can range from 3 kW to 9 kW or even higher. The power requirement depends on the type of material being machined, the cutting depth, and the desired cutting speed. Higher power spindle motors are generally capable of handling more demanding cutting tasks and harder materials.
2. Spindle Speed Range: The spindle speed refers to the rotational speed of the spindle motor and is usually measured in revolutions per minute (RPM). The speed range can vary significantly, but common options for 1325 ATC CNC router machines typically fall within the range of 6,000 RPM to 24,000 RPM. Lower speeds are suitable for cutting softer materials, while higher speeds are used for faster cutting and finer detail work.

It’s important to consider the specific requirements of your woodworking projects when selecting the spindle motor power and speed for your 1325 ATC CNC router machine. Harder materials or deeper cuts may require higher power and lower speeds to maintain optimal cutting performance and quality. On the other hand, softer materials or finer detail work may benefit from higher spindle speeds.

When purchasing a 1325 ATC CNC router machine, it’s recommended to consult with the manufacturer or supplier to ensure that the machine’s spindle motor power and speed options align with your specific application needs. They can provide guidance based on their expertise and knowledge of the machine’s capabilities.